ISSN 2074-9414 (Print),
ISSN 2313-1748 (Online)

Gingerbread with Fruit Filling: Preservation Factor Assessment

Abstract
The ratio of ‘bound’ and ‘free’ water plays an important role in the studies of staling of various baked confectionery products. Gingerbread with fruit filling is a traditional flour confectionery product with intermediate moisture, which causes transfer processes during storage. Temperature, relative humidity, light exposure, mechanical stress, and pressure affect the staling speed of such confectionery products. The shelf life of raw gingerbread was increased from 10–20 days to more than two months, which caused microbiological deterioration during storage. Moisture transfer between the filling and the crumb increases water activity and ruins the capillary structure of gingerbread during storage, thus significantly increasing the risk of microbiological damage. The present research featured the changes in the mass fraction of moisture and water activity of individual parts of raw gingerbread with fruit filling during storage at different temperatures and relative air humidity. The samples were packed in a 40-micron polypropylene film. During storage, the mass fraction of moisture and water activity may change in various parts of the product, which can lead to their molding. In this case, starch degradation processes led to the destruction of the structure and a decrease in the content of mechanically-bound moisture, as well as to the release of ‘free’ water and an increase in water activity. As a result, the risk of molding increased significantly. The water activity increased from 0.71 to 0.79 on the sample surface after six weeks of storage at 30°C and a 40% of equilibrium relative humidity. A set of experiments in microbiological indicators revealed no signs of molding in the freshly prepared samples. After one month of storage, the amount of mold reached 10 CFU/g. The quantity of mesophilic aerobic and facultative anaerobic microorganisms in different parts of the crumb increased from 3×10 to 9×102 CFU/g and in the filling – from 1×10 to 2.3×103 CFU/g. After two months of storage, the amount of mold reached more than 103 COE/g, which greatly exceeds safety norms. As the relative air humidity increased from 30% to 40%, the moisture transfer rate between the products and the environment was reduced by half. As a result, the shelf life decreased by 1–2 weeks. The research also studied the patterns of moisture transfer processes in summer and winter conditions. The research results contribute to the development of technology and shelf life forecasting for complex flour confectionery products with intermediate moisture.
Keywords
Gingerbread, molding, temperature, humidity, moisture transfer, gradient, water activity, storage, shelf life
REFERENCES
  1. Moshkanova IA, Novozhilova ES, Vasʹkina VA. Sovremennoe proizvodstvo pryanikov [Modern gingerbread production]. Confectionery and Baking Industry. 2017;(1–2):44–47. (In Russ.).
  2. Efremova EN, Zenina EA. Vliyanie netraditsionnogo syrʹya na kachestvo pryanikov [The impact of non-traditional raw materials on the quality of gingerbread]. Ehkologo-meliorativnye aspekty ratsionalʹnogo prirodopolʹzovaniya: Materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii [Environmental and Reclamation Aspects of Environmental Management: Proceedings of the International Scientific and Practical Conference]; 2017; Volgograd. Volgograd: Volgograd State Agricultural University; 2017. pp. 319–325. (In Russ.).
  3. State Standard 15810-2014. Confectionery. Gingerbread confectionery. General specifications. Moscow: Standartinform; 2015. 8 p.
  4. Stele R. Srok godnosti pishchevykh produktov. Raschet i ispytanie [Shelf life of food products. Calculation and testing]. St. Petersburg: Professiya; 2008. 480 p. (In Russ.).
  5. Kondratʹev NB, Kazantsev EV, Savenkova TV. Vliyanie upakovki na skorostʹ vlagoperenosa pri khranenii sakharnogo pechenʹya [The effect of packaging on the speed of moisture transfer during storage of sugar cookies]. Confectionery and Baking Industry. 2017;(5–6):12–13. (In Russ.).
  6. Dorina AT, Ognean M, Ognean CF, Danciu I. Effects of Some Sweeteners on Gingerbread Properties – Water Sorption. Journal of Agroalimentary Processes and Technologies. 2014;20(1):21–25.
  7. Cropotova J, Popel S. Influence of different hydrocolloids on physicochemical and heat-stable properties of fruit fillings. Annals of the University Dunarea de Jos of Galati, Fascicle VI: Food Technology. 2013;37(2):59–67.
  8. Dos Santos Pereira AP, Da Silva MHP, Lima ÉP, Dos Santos Paula A, Tommasini FJ. Processing and Characterization of PET Composites Reinforced With Geopolymer Concrete Waste. Materials Research. 2017;20(3):411–420. DOI: https://doi.org/10.1590/1980-5373-MR-2017-0734.
  9. Kondratʹev NB. Otsenka kachestva konditerskikh izdeliy. Povyshenie sokhrannosti konditerskikh izdeliy [Quality assessment of confectionery. Improving the safety of confectionary products]. Moscow: ‘Pero’ Publishing House; 2015. 250 p. (In Russ.).
  10. Aksenova LM, Kondrat’ev NB. Improving the safety of gingerbread products. Bread products. 2016;(8):42–43. (In Russ.).
  11. Cervenka L, Rezkova S, Kralovsky J. Moisture adsorption characteristics of gingerbread, a traditional bakery product in Pardubice Czech Republic. Journal of Food Engineering. 2008;84(4):601–607. DOI: https://doi.org/10.1016/j.jfoodeng.2007.07.006.
  12. Bosenko OA, Zakharova AS. Ispolʹzovanie mestnogo rastitelʹnogo syrʹya v proizvodstve pryanikov [The use of local plant materials in gingerbread production]. Tekhnologii i oborudovanie khimicheskoy, biotekhnologicheskoy i pishchevoy promyshlennosti: Materialy XI Vserossiyskoy nauchno-prakticheskoy konferentsii studentov, aspirantov i molodykh uchenykh s mezhdunarodnym uchastiem [Technologies and Equipment for Chemical, Biotechnology, and Food Industry: Proceedings of the XI All-Russian Scientific and Practical Conference of Students, Postgraduates, and Young Scientists with International Participation]; 2018; Barnaul. Barnaul: Polzunov Altai State Technical University; 2018. pp. 479–480. (In Russ.).
  13. Naumova NL. Preservation of enriching components during production and storage of choux gingerbread model samples. Food Processing: Techniques and Technology. 2015;39(4):57–62. (In Russ.).
  14. Razak RA, Karim R, Sulaiman R, Hussain N. Effects of different types and concentration of hydrocolloids on mango filling. International Food Research Journal. 2018;25(3):1109–1119.
  15. Urʹev NB, Taleysnik MA. Fiziko-khimicheskaya mekhanika i intensifikatsiya obrazovaniya pishchevykhmass [Physical and chemical mechanics and intensification of food mass formation]. Moscow: Pishchevaya Promyshlennost; 1976. 362 p. (In Russ.).
  16. Zubchenko AV. Fiziko-khimicheskie osnovy tekhnologii konditerskikh izdeliy [Physical and chemical bases of confectionery technology]. Voronezh: Voronezh State Technological Academy; 1997. 416 p. (In Russ.).
  17. Caurie M. A single layer moisture absorption theory as a basis for the stability and availability of moisture in dehydrated foods. International Journal of Food Science and Technology. 1971;6(2):193–201. DOI: https://doi.org/10.1111/j.1365-2621.1971.tb01608.x.
  18. Lurʹe IS, Skokan LE, Tsitovich AP. Tekhnokhimicheskiy i mikrobiologicheskiy kontrolʹ v konditerskom proizvodstve: Spravochnik [Technochemical and microbiological control in the confectionery industry: Manual]. Moscow: ColosS; 2003. 416 p. (In Russ.).
  19. Iorgachova EG, Makarova OV, Khvostenko EV. Stabilisation of gummy gingerbread quality during storage. Eastern-European Journal of Enterprise Technologies. 2014;2(12)(68):138–143. (In Russ.).
  20. Rockland LB, Beuchat LR. Water Activity: Theory and Application to Food. New York: Marcel Decker; 1987. 404 p.
  21. Chernaya AI, Shulga OS, Arsenieva LYu, Petrenko ED. Bakery and confectionery products with enriched food coating. Technology and merchandising of the innovative foodstuff. 2016;38(3):39–44. (In Russ.).
  22. Solomin DA, Solomina LS. Innovations in the Production and Use of Modified Starches. Storage and processing of farm products. 2014;(3):19–22. (In Russ.).
How to quote?
К вопросу оценки факторов сохранности пряников с фруктовой начинкой / Н. Б. Кондратьев, К. В. Федорко, Э. Н. Крылова [и др.] // Техника и технология пищевых производств. – 2019. – Т. 49, № 3. – С. 397–405. DOI: https://doi.org/10.21603/2074- 9414-2019-3-397-405.
About journal

Download
Contents
Abstract
Keywords
References